ECON-ABT-REL-R5G
ECON-ABT Telecom Application is a universal controller for DG Set which can be configured as both automatic or manual controller. USB, RS232 and RS485 communication. Three Phase Mains Three Phase DG, Three Phase Mains Single Phase DG, Single Phase Mains Single Phase DG, programmable contact Load management function, Remote Upgrade, Auto manual selection by Mode switch.
Get a Quote
View/Download Catalogue
| Specifications | |
|---|---|
| Mains Measurements | 1 Phase/ 3 Phase Voltage, 1 Phase/ 3 Phase Current, Frequency, PF, KW, KVA,KVAR, KWH, KVAh, Run Hour. |
| Generator Measurements | 1 Phase / 3 Phase Voltage, 1 Phase / 3 Phase Current, Frequency, PF, KW, KVA, KVAR, KWH, KVAh, Battery Voltage, Water Temperature, Oil Pressure, Fuel Level ( Both in percentage and Litre), RPM, Run Hour, Service Due Hour. |
| Protection / Supervision Mains | Under/Over Voltage, Under/Over Frequency, Phase Sequence, Voltage Unbalance, Overload. |
| Protection / Supervision DG | Under/Over Voltage, Under/Over Speed, Current Unbalance, Overload, RWL, LLOP, Charging Alternator/V-belt, Emergency off, Service Due, Fail To Start(only when configured as AMF controllers), Fail To Stop(only when configured as AMF controllers), Oil Level, Oil Temp, Canopy Temp, Fire, HET, LFL |
| Load Management | Programmable contact Load management function. The load management contact will switch on when the current on the generator has crossed a programmed limit and will reset when the current has fallen below the reset programmed limit. This function can be used to cut-off unnecessary loads or start a second generator when the load goes above a limit. |
| R5G | Remote Upgrade, Auto manual selection by Mode switch. |
ECON-ABT-REL
Telecom Application, USB, RS232 and RS485 Comm, Load Management.